Radjet800 and DX8 setup issue

[Danny_K75]

Hi all,

I've setup a Radjet 800 on my DX8 but I can't get the control surfaces to go in the correct directions.
Currently the elevator works in the correct direction, but not the ailerons.
When I reverse the two servos then the ailerons work correctly and the elevator is reversed.

What am I doing wrong?

Thanks!

[dillwhacker]

You need to swap the servos plugged into the receiver - then you'll be able to get both correct with the TX reversing function.

[Danny_K75]

Sounds like a good solution, many thanks!

[Danny_K75]

That worked a charm, thanks!