Announcement

Collapse
No announcement yet.

Getting the car remapped!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Getting the car remapped!!

    Took it in today to have it stage 1 remapped I think its called.

    Anyway it didn't happen as it took ages to upload the new custom settings as they were banging on about every gear has different torque settings and some other crap so got to go back but the awesome news was that my car is actually making 12bhp more than the stock figures claim and 16lb ft torque less than stock figures claim.

    Pretty damn good for stock I think. And the torque atm is like a diesel as it starts very early at 1800rpm and goes to 4400rpm then it drops off where as the bhp maxes out at 3900rpm and stays there till 6500rpm.

    He reckons I should see minimum 280bhp and 310ft lb torque which will make it a proper handful. Even now the torque steer and traction are all over the show but I want more when in the higher gears as the lower is great as it is but want more when i put my foot down on the motorway which apparently this will give me.


    Will have a print out of the graph when I go back before and after. Forgot to bring the print out from today home.
    + 7 x Eddies finest EGS's



  • #2
    What car is that? I wish tuning mine was as simple as a remap! I had to fit an aftermarket boost controller, this along with a turbos back exhaust and a larger front mounted intercooler gave me 298bhp with 355lb/ft of torque (up from 260bhp and 300lb/ft)
    MSH Protos Max V2. Vbar Neo, Cyclone 715, zeal, talon 120
    MSH Protos 500 FBL. VX1e, Zeal 480
    Trex 150. In one piece and flying well........for now!!
    Futaba 14sg



    http://www.oxonhelicollective.org.uk

    sigpic

    Comment

    Working...
    X