Tweet
I need to make up a custom loom for an ImmersionRC vTx / Cyclops OSD combo.
Rather than cut the wires off the camera etc I would rather do it properly and make a decent set of crossovers so it all looks neat.
I need make up the following type of loom/connector - all I know it as is Molex 5p (Fatsharks description) but I can't find anything online
[ATTACH=CONFIG]62661[/ATTACH]
I need the above loom and basically the same thing but with a 'female molex' equivalent for the other side of the OSD.
FYI this is the OSD I'm using - [URL="http://www.foxtechfpv.com/cyclops-breeze-pro-p-1042.html"]CYCLOPS BREEZE PRO [Cyclops Breeze Pro OSD] - $95.00 : FOXTECH FPV SYSTEM[/URL]
Cheers
Dani
Rather than cut the wires off the camera etc I would rather do it properly and make a decent set of crossovers so it all looks neat.
I need make up the following type of loom/connector - all I know it as is Molex 5p (Fatsharks description) but I can't find anything online
[ATTACH=CONFIG]62661[/ATTACH]
I need the above loom and basically the same thing but with a 'female molex' equivalent for the other side of the OSD.
FYI this is the OSD I'm using - [URL="http://www.foxtechfpv.com/cyclops-breeze-pro-p-1042.html"]CYCLOPS BREEZE PRO [Cyclops Breeze Pro OSD] - $95.00 : FOXTECH FPV SYSTEM[/URL]
Cheers
Dani
