trex to blade?

[Garth84x]

Hi all,

how interchangeable are parts from a trex 450 to a blade 450, blade grips in this case.

i've got hold of four sets of main blades, think they are for a trex though, and a bit of a gap in the blade grips.

[That Guy]

You will have to shim the blades mate. You could use the plastic root from your damaged woddies to make the shims.

[Boggy]

Make yourself some shims from a plastic milk bottle

[cjcj1949]

I thought credit cards were the thing. Lots of Clone parts are very cheap and good quality now, especially main blades. Lots of parts can be swapped like motor, gyro,servo, rx,esc. I've put the CNC tail unit on a 450 SE clone. Even the swashplate can be adapted, but you have to swap the balls over and move the centre one back to front. I think the boom can be swapped and the belt. Those were Blade400 and Twister Storm bits.

[sjm]

I used metal washers I had, have I done a bad thing?