Align gp 750 giro problem

[BASS 666]

I just read the instructions and thats what it says?? If that aint right I dunno bro, is there one on Helifreak about the 750 gyro??

edit here ya go Trex 450 Pro build videos - HeliFreak

fk it mate i cant be arsed im fed up looking at it anyway..

[KevDavies]

defeatist LOL

Let me watch the finless video and ill pm ya what I find

And cheer up im only yankin ya chain!

[GIXERMAN]

From memory , do one side of the limit wait for flash then do other side then flash. Then press button again, not like spartan or csm with use of toggle switch.

[jwatts007]

From memory , do one side of the limit wait for flash then do other side then flash. Then press button again, not like spartan or csm with use of toggle switch.

Correct got one here on my rappy...

[BASS 666]

From memory , do one side of the limit wait for flash then do other side then flash. Then press button again, not like spartan or csm with use of toggle switch.

yeah gix thats right but on you tube it shows the blades staying left and right then you back them in a bit but my mates blades are going back to the middle..

[GIXERMAN]

yeah gix thats right but on you tube it shows the blades staying left and right then you back them in a bit but my mates blades are going back to the middle..

Is it in rate mode before you start then, as in red on display before pressing?

[BASS 666]

Is it in rate mode before you start then, as in red on display before pressing?

yes mate i have tried it on both rate and hh..

[Nick B]

They do go back to centre in prog mode,they record where they stopped,if you go too far you must do them again.

[st200ol]

They do go back to centre in prog mode,they record where they stopped,if you go too far you must do them again.

Yes, in prog mode you hold the stick at one end then press the button to store the position, when you let go of the stick the servo will return to center.

You are supposed to do it in a set sequence, if it doesn't work first time change the side you do first, i.e. do left the right if it doesn't work try again power off then do right then left.

Just keep trying it will store it you may need to try the procedure a few times.

[milly0812]

Align gp 750 giro problem

I don't remember having to push the button to store just held the stock at the required limit for a second and the led flashes to confirm the stored position, but it has been a while

[Nick B]

Agree with Don,just take to the limit both sides then push button.

[st200ol]

Yes sorry my mistake, I think I was thinking about another gyro Spartan Quark maybe, you guys are correct, just hold the rudder stick at each limit for a while, press the button and it should store the new limits.

[p4ddy]

Set ep's to 100 go through sequence to ep's move stick one way & back off to position, push stick other way & repeat. Press mode button on gyro..job done

[BASS 666]

thanks guys..