Announcement

Collapse
No announcement yet.

Best price for HE50H11

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Best price for HE50H11

    Hi all.
    My 4.8v 4600mah NIMH RX pack (Rappy 50) is playin up now...... should i buy a new 5000mah one, stick to a 4600mah or go for a lipo conversion.....more expensive tho!

    Ebay 4600 £16.50 + £2.00 p&p
    5000 £18.50 + £2.00 p&p

    HE50H11 £50 !! or has anyone got an idea where there's a cheaper one avaiable on the tinternet!

    Cheers, Karlos
    Cheers all.....Karl...

  • #2
    push the boat out, go for the lipo conversion and get those servos kickin

    Comment


    • #3
      Karl stick to Ni-mh but go 5 cell to speed the servos up better response etc. I use these rx batteries 6V 5000mAh SubC NiMH battery pack Twin Lead Vapextech | eBay

      and the align reg cheapest I can find is £47 plus postage

      My advice stick to ni-mh and get the battery I linked to
      Some say my left nipple is the shape of a Raptor canopy.......... And that for fun I chase sheep in wellies 3 sizes too big. All I know is I am ​3D Clod
      Very proud to be a Presenter on ROTORS! The RC Helicopter show


      Very proud to be a 2x EGS winner

      Collector of SAB Goblins

      Comment


      • #4
        Originally posted by KevDavies View Post
        Karl stick to Ni-mh but go 5 cell to speed the servos up better response etc. I use these rx batteries 6V 5000mAh SubC NiMH battery pack Twin Lead Vapextech | eBay

        and the align reg cheapest I can find is £47 plus postage

        My advice stick to ni-mh and get the battery I linked to

        Cheers for that. Ordered one and got it today. Dropped a clanger though! 2 of the servo's are Futaba digital's and run on 4.8v only.
        Can I buy the Align 5.1v voltage regulator and place it straight off the 5 cell nimh battery before the switch to reduce the 7v + coming off it? This will regulate the whole voltage to the heli's electrical system to 5.1v won't it??
        Or do I need a regulator for each servo that isn't compatible with the higher voltage??

        Really I should have stuck to the 4 cell but no worries eh!

        Cheers.
        Cheers all.....Karl...

        Comment

        Working...
        X