Treasure. I knew I had some somewhere..

[pgkevet]

Still moving stiff from the barn and still unpacking from 18mths ago..Voila.. I found a box of blades. I thought I had some spares somewhere but didn't realise it was 10 pairs of 325's, 2 pairs of 600's 2 pairs of 690's and 2 pairs of 710's an dfor a change some aren't even my usual cheap cr@p - even one of the 710's is radix.
Along with that a bunch of orphan blades i don't quite know what to do with mostly 'cos some are align's and they aren't always obvious as to what spec they are.
Quite chuffing when only yesterday i found 5 pairs of blades for the 500 too.

Could be time for some serious mud-bouncing..

Weirdest there's a pair of JP carbon 710's with a 4mm bolt hole... I must have been high when I ordered those but suppose the bush can be drilled..unless anyone knows someone who wants a cheap set?

[trillian]

If you have an orphan standard Radix 710 I might have a match for it (you would need to weigh it and see if these are close enough - in any case it's no use to me).

It's great finding stuff like that, especially if you have almost forgotten about it.

[pgkevet]

If you have an orphan standard Radix 710 I might have a match for it (you would need to weigh it and see if these are close enough - in any case it's no use to me).

It's great finding stuff like that, especially if you have almost forgotten about it.

I might have a radix orphan.. will have to look. The radix I mentioned are a new in box pair.
It was a bit like christmas..