Backlight

[BASS 666]

where do you get the backlight kit for a dx7s ? cheers guys....

[Boggy]

You could try here.

[BASS 666]

im looking the name of a shop cause i know nothing about the shops in england and i was hoping someone had got one from a good source....

[Boggy]

Sorry couldn't miss an open goal! . TBH I think because of the BS stds etc its not a common thing over here,modified tx's stir up the fun police a treat!.

[BASS 666]

Sorry couldn't miss an open goal! . TBH I think because of the BS stds etc its not a common thing over here,modified tx's stir up the fun police a treat!.

oh i must not do that....

[sp4rky-m4rky]

I just got this one for my dx6i Blue Backlight kit for Turnigy 9X Flysky FS-TH9X, spektrum DX6i, Uk Seller | eBay

Just desoldered the wires that are fitted and added a resistor inline. I cant remember what value but its easy enough with V =IR and the 60-90mA draw specified.

Works brilliantly and is such a great improvement.

[BASS 666]

I just got this one for my dx6i Blue Backlight kit for Turnigy 9X Flysky FS-TH9X, spektrum DX6i, Uk Seller | eBay

Just desoldered the wires that are fitted and added a resistor inline. I cant remember what value but its easy enough with V =IR and the 60-90mA draw specified.

Works brilliantly and is such a great improvement.

good job marky. i know nothing about electronics if it was just a solder job it would be no probs.

[xygax]

i did a widget to turn it on automaticly when the buzzer bipped stays on for 30 seconds... ... simples

Steve

[BASS 666]

i did a widget to turn it on automaticly when the buzzer bipped stays on for 30 seconds... ... simples

Steve

now your just showing off.

[sp4rky-m4rky]

V = IR therefore R = V/I So take the voltage of your tx and divide it by like 0.075A to give the resistor value. Then it is easy soldering the rest of it and it makes for a neat job. I added a toggle switch because I wasn't sure if i would want it on all the time, works great.