Align TRex 600CF setup

[Nigel GF]

Hi,can anybody give me abit of advice on Pitch and Throttle curves for a Trex 600cf,I just want it at the moment quite tame ie hovering and flying circuit's etc,I have set the pitch angles at the moment at -2% and +8%,what should I set the Throttle Curve too?also what setting on the Swash at the moment it is set on Ail-60 Ele +60 Pit+60,the Gyro I have set at Normal 56% Stunt 54.5% Stunt2 54.5% Hold 56% (I am using a spartan quark gyro)
Any other info/help would by really appreciated on the setup on this Heli,as I have been flying Blade 450 3d and Blade 450x which as you all know is BNF.

[PaulJC]

i'm not sure what you mean by your swash settings?

Never had trex 600 or Spartan gyro so cant help you there either, -2/+8 should be fine for just lazy flying about, maybe have about -4 though, sometimes you'll want to drive down if a big gust takes you up

[Nigel GF]

The Swash is the SwashPlate on the Transmitter (Spektrum DX8)adjusts the amount and direction of travel for the aileron,elevator and pitch functions.

[PaulJC]

Yeah that i get, what i dont is why some are + and others are -, does the trex600 have a reversed servo?

If 60 is the servo travel i would say that it is too low and that you need to move your ball link further in on the servo arm, i'm sure someone with more experience of this model will be along shortly...

[johnsandywhite]

The Swashplate mix is the amount of travel (NOT ATV) for Aileron, Elevator and Pitch. I have 72% Aileron, 60% Elevator and 34% Pitch. They say you should have the same on Aileron and Elevator. But I only got a good setting on a 550FBL with 60/60/40.

[Nigel GF]

I have done some investigation on some sort of setup I could try that is the following on my DX8:
Swash Type-3 servo's 120

Swash Plate-Ail-46,Ele+42,Pit+43

Gyro-Rate 70% Ch:Gear Sw.On
Servo Travel-All 100%
D/R-Expo-Aileron Pos 0 D/R=80 Expo=15
D/R-Expo-Elevator Pos 0 D/R=80 Expo=15
D/R-Expo-Rudder Pos 0 D/R=90 Expo=0
Throttle Curve - N=0 % 40% 40% 40% 40%
Pitch Curve-N = 42% 59% 70% 78% 90%
Throttle Hold 10% 10% 10% 10% 10%
is this setup pretty close to what I can fly with?

[Geek]

Hi again Nigel
you getting people trying to help that have never setup a flybared model

Call or pm we will do it properly

What you doing tomorrow?