Can anyone weld alloy for me??

[jayfrs]

Hi guys,

I have a crack in my hatrori On one of the welds from a crash the blade hit the arse of it and cause it to split it i am after a factory finish if poss

heres a pic



Many thanks

[KnifeEdge]

Someone get the tig welder out! Not easy as its very thin.

[dave j]

you will never get a factory finish as they are robot welded

[jayfrs]

Anyone friends with a robot?? LOL ok well how tidy could it be???

[waveydavey]

It just so happens that the robot part is what I do for a living and welding is my process. I would say that from the look of the weld it is hand tigged. It would mean cutting it back and removing whats there which is quite difficult. To pay someone to do it I reckon theres 2 to 3 hours work @ £30 or so an hour so you're looking at best part of £100. It needs someone to do it as a favour so factory finish isn't going to happen unless that's their job. I could take a look as long as you accept that it's not going to be as good as new.

[jayfrs]

It just so happens that the robot part is what I do for a living and welding is my process. I would say that from the look of the weld it is hand tigged. It would mean cutting it back and removing whats there which is quite difficult. To pay someone to do it I reckon theres 2 to 3 hours work @ £30 or so an hour so you're looking at best part of £100. It needs someone to do it as a favour so factory finish isn't going to happen unless that's their job. I could take a look as long as you accept that it's not going to be as good as new.

as long as it looks tidy i will be happy and i would very much appericate it if you could take a look at it for me! and let me know!!

cheers

[waveydavey]

Pm Sent

[foxypike]

May be able to put you in contact with someone. if you still need help

[jayfrs]

May be able to put you in contact with someone. if you still need help

Ross if i give to you you will solder it for me! LOL and use the nipex cobras!!!!

[TonyUK]

Run it lean for 7 minutes, I think it would self heal

[snowy]

I've tig welded a few pipes in the past but not to factory finish pretty difficult due oil residue in pipe but not impossiable

[foxypike]

You dont get these problems if you go electric. nuff said

[jayfrs]

Run it lean for 7 minutes, I think it would self heal

why didnt i think of this!!!! cheers!

[foxypike]

Get some model tecniques gn-5 like the good old dayz.nice and thick that will block it up aye tonyuk

[Gixxer]

You dont get these problems if you go electric. nuff said

No, you get a burned out heli instead when the LiPos burst into flames... nuff said