MG90 servo's ?

[scosha37]

i recently bought some Towerpro MG90 servo's, put them in my heli and now everything is reversed,they seem to be reversed,i hooked another type of servo up and the travel was normal,but when i hook the MG90 up it goes the other way,wot is wrong, i thought all servo's all travelled the same way,i can correct this by reversing the switche's on the tx,but cant reverse the aux 1,it bugger's everything up any idea's guy's

[Mark_T]

Perfectly normal, not all servos are the same, nor are all radios the same as far as which stick direction moves a servo which way.

It will not be a problem though, but I suspect you may need to look at changing your swash mix direction rather than reversing the Aux1 channel. Give us more details and we can help sort you out I'm sure.

[cjcj1949]

I'm using TowerPros on a 450 clone. I think they go the same way as Hitec HS65s which was opposite to the Twister Storm/ Blade 400 nylon strip a gear always ones. Which tx do you have?

[scosha37]

it's ok m8 i had other servos lying around just changed the circuit board over, perfect now,i was'nt giving in cause they were all metal gears that would have beeen a waste of money...sorted trex 450 clone