Vbar log file question

[helimadness]

Hi All.
Had my first few flights with the Vbar the other day. Here is my log file. Not sure if the PDF link will work.
I have a few high vibration warnings but seem to be around the same time. Maybe during lift off. Only seems to be one at most 2 in a row. Few raised vibration levels. IS this normal or something I need to improve on.
The vibration sensors are in the main unit yeah? The sensor unit is just the gyros is that right?

Thing was flying smooooootttthhhhh as so happy to not mess with it if looks ok.

Cheers
Mark


vbar log 1-7-2012.pdf

-----------------------
Trex 500 EFL Pro Vbar
JR XG7

[helimadness]

just had another few flights and when I put back together I replaced one of the tail bearings that was just a little notchy. Here is the latest log file from 3 flights. Was blowing about 10-20 knots so a little exciting.
All looks fairly smooth.

Cheers
log 7-7-2012.pdf.pdf

[kenny.c]

What sort of flight was it....? When doing hard flying or rapid changes of direction....some raised vibration logs are totally fine....any extreme vibrations should be investigated.

Ken

[Mslater]

Nothing in there to be worried about - looks fine to me. Start to worry when you get lots of vibration warnings, especially when it says Extreme Vibration.

[helimadness]

Just a bit of sport flying. Only really learning. Just started to practice inverted hovering. figure 8 stall turns are about it at the moment.
Loving the Vbar. Is flying so smooth.

Cheers