If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I am in abit if the same dilemma but it's between the logo 700 and the goblin I am leaning more towards the goblin as its more unique and I would guess cheaper to repair going by the 800 prices and taking abit off
But if it was that or a Tdr I would go for the logo as I would want a model more for 3d and not speed runs.
And Ross do you have an idea of the price of the logo ? And is it a combo deal
I am in abit if the same dilemma but it's between the logo 700 and the goblin I am leaning more towards the goblin as its more unique and I would guess cheaper to repair going by the 800 prices and taking abit off
But if it was that or a Tdr I would go for the logo as I would want a model more for 3d and not speed runs.
And Ross do you have an idea of the price of the logo ? And is it a combo deal
Thanks liam
As for price, I'm guessing £2000 for the extrem 800 and £1150
for a logo 600 so somewhere around the £1500-1650 mark as a similar combo.
The logo 700 will be around the £900-£1000 mark
And unless things change there is no combo due
The price above Is for airframe only
The reason they did a combo 800 was there was very limited options for 800 size
But for the 700 market there is loads
Plus A lot of guys already have esc motors etc already
This is what I was told some time ago
But things could change and to be used as hear say
Different flying styles I think... TDR goes damn fast and can do 3D, but not quite as tight or as comfortably as the Logo 700 which is more 3D based as said above.
The Logo 700 is not a light machine for it's class so I guess it's unlike previous Logos. I guess messing around with blade and pack size you could get a good feel.
I haven't flown either mind you, just going by what I've seen.
Get both!
You are welcome to fly my TDR Laurence, it's not setup for hard smack 3D tho, but it can be.
I've never flown a Logo 700 so I cannot say, but TDR is a class on its own. I'd have both of them if I had to choose
I don't know a pilot of on this forum who would be able to outfly TDRs 3D capabilities. If there is one, please pop up TDR for speed runs only, obviously never flown one....
The logo i am waiting to see what that is like, holding back judgement until they have been out a while.
The TDR, i just dont know if it would suit your tight piro manovers you do Ross, but could be wrong, never seen one flown like that.
3D machines, what about the X7 or the new trex V3, that will be a monster. Not tempted by a goblin 630? i am
James Sponsored by Align-Trex.co.uk Optifuel/optipower MKS servotech
Comment