Announcement

Collapse
No announcement yet.

Blade 130x battery ??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Blade 130x battery ??

    What type of battery/ battery connector will the 130x use, is it the standard JST connector ?


    Thanks


  • #2
    I checked this out when I was at zone because I wanted to know.

    The one I saw had a 3 pin JST connector, with only the outer two pins used.

    Ill probably just convert everything to micro deans when i get mine though.
    NONE OF THE BELOW HELI'S ARE OWNED BY ME ANY MORE
    TT Raptor G4 + Vbar
    | MCPX V1 + HP05 Brushless & All the upgrades | 130x Stock | Henseleit TDR 2013 +Vbar | 450L DOMINATOR 6S + Mini Kbar | Logo 550SX +Vbar Mini
    Proud wearer of the EGS award!

    Comment


    • #3
      Oh right, so you wouldn't be using the battery that comes with the kit then ?

      I want to use the standard red JST connectors, so I suppose I'll buy some batteries that already use JST connectors and just put JST's on the heli

      Comment


      • #4
        Yeah i know that CPN, its just the odd connectors i'm curious about, may convert to JST

        Comment


        • #5
          I think its JST? The female on the heli looked the same as an MCPX connector but 3 pin not two.

          Ill cut the stock connectors off and solder on micro deans when i get mine
          NONE OF THE BELOW HELI'S ARE OWNED BY ME ANY MORE
          TT Raptor G4 + Vbar
          | MCPX V1 + HP05 Brushless & All the upgrades | 130x Stock | Henseleit TDR 2013 +Vbar | 450L DOMINATOR 6S + Mini Kbar | Logo 550SX +Vbar Mini
          Proud wearer of the EGS award!

          Comment


          • #6
            Jst ??

            [ATTACH=CONFIG]42358[/ATTACH]

            Comment


            • #7
              pretty sure it was these.

              Micro JST 2.0 PH 3-Pin Connector w/. Wire x 10 Sets | eBay
              NONE OF THE BELOW HELI'S ARE OWNED BY ME ANY MORE
              TT Raptor G4 + Vbar
              | MCPX V1 + HP05 Brushless & All the upgrades | 130x Stock | Henseleit TDR 2013 +Vbar | 450L DOMINATOR 6S + Mini Kbar | Logo 550SX +Vbar Mini
              Proud wearer of the EGS award!

              Comment


              • #8
                Ahhh okayy.

                Don't see them very often, i wonder why they decided to use them ... Lightweight ??

                So how are you going to go about putting micro deans on the female plug ??

                Comment


                • #9
                  I will take some complete photos of the 130 tonight and post
                  mark
                  3x700s none mine

                  Comment


                  • #10
                    cut the plug off and re-solder micro deans!
                    NONE OF THE BELOW HELI'S ARE OWNED BY ME ANY MORE
                    TT Raptor G4 + Vbar
                    | MCPX V1 + HP05 Brushless & All the upgrades | 130x Stock | Henseleit TDR 2013 +Vbar | 450L DOMINATOR 6S + Mini Kbar | Logo 550SX +Vbar Mini
                    Proud wearer of the EGS award!

                    Comment


                    • #11
                      Yeah but the current plug on the 130x has three wires doesnt it, how will you put a plug on the battery as that has 3 wires ??

                      Comment


                      • #12
                        No its a 3 pin but the centre pin was vacant if i remember correctly, there wasnt even a pin in the centre, it had been removed.
                        NONE OF THE BELOW HELI'S ARE OWNED BY ME ANY MORE
                        TT Raptor G4 + Vbar
                        | MCPX V1 + HP05 Brushless & All the upgrades | 130x Stock | Henseleit TDR 2013 +Vbar | 450L DOMINATOR 6S + Mini Kbar | Logo 550SX +Vbar Mini
                        Proud wearer of the EGS award!

                        Comment


                        • #13
                          Originally posted by Delarado View Post
                          No its a 3 pin but the centre pin was vacant if i remember correctly, there wasnt even a pin in the centre, it had been removed.
                          Is that the same for the battery ??

                          Comment


                          • #14
                            didnt see a battery but if it did have a third wire it wouldnt connect to anything! :P
                            NONE OF THE BELOW HELI'S ARE OWNED BY ME ANY MORE
                            TT Raptor G4 + Vbar
                            | MCPX V1 + HP05 Brushless & All the upgrades | 130x Stock | Henseleit TDR 2013 +Vbar | 450L DOMINATOR 6S + Mini Kbar | Logo 550SX +Vbar Mini
                            Proud wearer of the EGS award!

                            Comment


                            • #15
                              Originally posted by SamS View Post
                              Yeah i know that CPN, its just the odd connectors i'm curious about, may convert to JST
                              Same as UMC beast. It's charging/balancing plug in one.
                              Michal

                              sigpic

                              Comment

                              Working...
                              X