Tweet
Had about three flights with my rex and wollip 
, had to laugh if not id have cried . Fly ar is deafanatly supposed to not be here 
, had to laugh if not id have cried . Fly ar is deafanatly supposed to not be here
-
REGARDS JAMIE
Knight 50,50 hiper,hatori pipe,gy401+9254,ttcarbon blades futaba ff7fast 2.4 ghz set up with 3152 digi s all round and a rev loc 10
450 rex standard setup
Phoenix sim...
Plus two gliders and one pits special biplane
-
Ooooooooopssss!!!!!!!!Phil
"Be who you are and say what you think...
Because those that matter...don't mind...
And those that mind... don't matter"
Blade 130x, Park Zone Mini Sukhoi, EDF F16 thingy, some Gliders and some broken stuff
-
eek, it'd make a cracking egg beater at that angle! Hope it's flying again soon!sigpicX2Comment
-
Gutted for you . Oh well at least it can be rebuilt and all that!
Oliver Crawford - Align 12S T-rex 600e, Align 610 x3, Spartan 760, tail Align 620, Scorpion 4025-630 KV, Bec pro, Castle Creations HV 80A ice.
Align T-rex 700e, Align 610 x3, 3g, Spartan 760,Align 650, Bec pro, Castle Creations HV 110A.Comment
-
At least it wasn't the knight 50 , would have been gutted but the rex is easly repaired at minimal cost compared to a 50 size . Blades are intact to
REGARDS JAMIE
Knight 50,50 hiper,hatori pipe,gy401+9254,ttcarbon blades futaba ff7fast 2.4 ghz set up with 3152 digi s all round and a rev loc 10
450 rex standard setup
Phoenix sim...
Plus two gliders and one pits special biplane
Comment
-
ive decked mine twice now, and both times it cost me less than £40 to repair including a new set of blades both times
Comment
-
Looks like a load of wires came all loose at the same time as your crash :-) Interesting and original 'flybar' angle though.T-Rex 450S - Just needs fine tuning now
Phoenix Sim.
Spektrum DX6
Picco Z
Classic AS800Comment
-
Mine looks like that at the moment
still not unusual after a flight from me
All the best
Tony.
Thunder Tiger E700 - Align 700N - Fusion 50 - Align 600N
Comment
-
Where is the best place to get rex parts to repair this heli and i was planning to get a 4s lipo at the same time. The esc will take it and i was just wondering what improvement in performance id get for the extra 10 pounds worth compared to a 3s lipo. Think a hole head is required
REGARDS JAMIE
Knight 50,50 hiper,hatori pipe,gy401+9254,ttcarbon blades futaba ff7fast 2.4 ghz set up with 3152 digi s all round and a rev loc 10
450 rex standard setup
Phoenix sim...
Plus two gliders and one pits special biplane
Comment
-
I usually get all my 450 bits from Fast Lads although ive used skyline and real raptors for bits. I just like the fast lads web page better.
can't help with the 4s not tried one.
was thinking about getting a V2 head for mine, next time I need to order up parts, got so many spares at the moment so might as well work my way through them first LOLAll the best
Tony.
Thunder Tiger E700 - Align 700N - Fusion 50 - Align 600N
Comment
-
Here is a complete head http://www.fast-lad.co.uk/store/prod...roducts_id+962
Hope the link works
..
Thing is all the bits required id be aswell getting this and hopefuly they wont break in every encounter. Already broke the fly bar control arm while i was making the kit , seemed a little fragile .No the link didn't work , head is all metal and 99 pond seems like a good reute to take..REGARDS JAMIE
Knight 50,50 hiper,hatori pipe,gy401+9254,ttcarbon blades futaba ff7fast 2.4 ghz set up with 3152 digi s all round and a rev loc 10
450 rex standard setup
Phoenix sim...
Plus two gliders and one pits special biplane
Comment
-
This is a link for the complete V2 head inc Swash
http://www.fast-lad.co.uk/store/prod...oducts_id=1349All the best
Tony.
Thunder Tiger E700 - Align 700N - Fusion 50 - Align 600N
Comment
-
So does mineMine looks like that at the moment
PeteWe don't stop playing because we grow old,
we grow old because we stop playing.....Comment
Comment