450 Sport blade spacers

[hga77]

Finished an upgrade build for a 450 and now I'm stuck and don't know where to look. I have a 450 sport head v3 and a set of SpinBlades blades to go with it. The problem is the blade root is too thin for the grips. So I need spacer, but very thin spacers.

Grip spacing: 4.7mm
Blade root: 4mm

Thinking of making some that are 0.3mm (two on each blade, top/bottom)

Question, what material can I use since it's so thin at 0.3mm?


** I tried using a couple 0.5mm on each blade but that is way to big to fit. And I don't want to use a single washer on a blade.

[AlastairC]

I was lazy and used these on my 400 to fit normal blades:
http://www.fast-lad.co.uk/store/radi...1-p-13886.html

They come in a pack with various thicknesses.

[hga77]

Thanks. I've placed an order

[hga77]

I was lazy and used these on my 400 to fit normal blades:
Radix Spacers for 325mm mian blades YEI-YB-SHIM1

They come in a pack with various thicknesses.

Quick question. Do you know what the id (inner diameter) for those washers in mm? Is it for M3 bolts (3mm)?

[AlastairC]

Quick question. Do you know what the id (inner diameter) for those washers in mm? Is it for M3 bolts (3mm)?

Yea it is for the standard 450 M3 blade holder bolts.