More Problems. Charing PL6

[lgray88]

I am jsut about ready to start gettin a few flights in with my electric heli. I have a few packs that were bought second hand. So as i go too charge them up, i plug all 4 packs in to a paraboard and then connect balance leads. When i go through the charger settings i select for it to charge at a rate of 10amps. When i start the charge the error message comes up "Bad cell count node wiring FMA". How do i over come this as i cant seem even charge any lipo for this message showing up.

Thanks in advance

[scuba steve]

you need to change node to XH to use a non FMA para board :

here is how :

Switching to XH/EH mode at the PL6:
1.
Press INC+DEC (i.e., press both INC and DEC at the same time) to display the Options menu (Choose TASK?).
2.
Press INC or DEC until you see Charger Options, then press ENTER.
3.
Press ENTER until you see Node Connector?
4.
Press INC or DEC until you see XH/EH Wiring on line 2 of the LCD.
5.
Press and Hold BACK to return

job done....happy charging


Scuba

[lgray88]

Nice on mate, thanks for that. do you know if theres any other settings that should be adjusted from standard?