Announcement

Collapse
No announcement yet.

Anybody tried Hacker Top Fuel Lipo's?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Anybody tried Hacker Top Fuel Lipo's?

    I was digging around to find the lightest 6s 4000mah lipo packs for my new Synergy e7 and i came across these:

    TopFuel LiPo 30C-LIGHT 4000mAh 6S | LiPo 30C Light (NEW) | TopFuel LiPo + LiFe | Accus

    They weigh just 615g each. They also do a 40C 3900mah version at the same weight. Flying these packs could save me almost 200 -300 g over similar sized lipos from other brands.

    Has anyone had any experience of hacker lipos? How do they perform? There isn't much feedback around on these.
    Synergy E7 - 4525 Ultimate, Futaba 252/276, Vortex, YGE 160 ESC, HV2 BEC Alu, Rail 696/106
    Teams - Align-trex.co.uk / Synergy / Spartan

  • #2
    I've not seen these before, but if you are focused on weight, you can still do better than 615g

    It does seem that not everyone makes a 4000 size so that does limit the choice a bit, OptiPower are 3500 or 4300 for example, but from the looks of things the FlightPower 40C Nano packs come in a bit lighter again at 559.2g

    FLIGHTPOWER NANO ~ EVO-ULTRA 40 22.2V 4000 mAh 40C 6 Cell LiPo Battery

    Comment


    • #3
      Thanks, i had been looking at FP lipos and must have misread the specs, i thought they were the heavy ones! Now i really will have a to try a set.
      Synergy E7 - 4525 Ultimate, Futaba 252/276, Vortex, YGE 160 ESC, HV2 BEC Alu, Rail 696/106
      Teams - Align-trex.co.uk / Synergy / Spartan

      Comment


      • #4
        The 50C packs are heavier for sure, the 30C ones would be lighter again I expect but doesn't seem to be any of your size in stock at the moment.

        40C is a good compromise in the middle.

        Nice bonus is they ship with EC5 already fitted.

        Comment


        • #5
          check fp ec5 as they come with cold/crap solder joints which will shut down a kontronik esc, rotor world did a test with those hacker battries think it was a two month write up with the logo 6003d

          Comment


          • #6
            Originally posted by stocksy27 View Post
            check fp ec5 as they come with cold/crap solder joints which will shut down a kontronik esc
            Always good advice to check any pre-fitted connector, but I think it would be fair to say from the quantity of these that I've seen in use, that a bad solder joint is the exception not the norm.

            Comment

            Working...
            X