Tweet
Evening, took delivery of a "new" Trex 250 today complete with a Futaba R6106HFC rx, Castle Creations Phoenix 25 esc, and others.
Managed to bind the rx to my Tx (I think, can't find manual ANYWHERE).
Esc plugged in Ch3 on Rx, battery plugged in and no beeping. Only a red flashing led on the ESC. If I pull the esc plug From the Rx the motor/esc beeps...
Help please! I'm pulling my {^+}%#+* hair out!
Edit: I've reversed my thrl channel, no difference. I've turned the Tx on with stick at High to start programming mode, nothing. No beeps.
Seems like the esc isn't initializing for some reason. Nothing in the ESC manual describes my problem.
Managed to bind the rx to my Tx (I think, can't find manual ANYWHERE).
Esc plugged in Ch3 on Rx, battery plugged in and no beeping. Only a red flashing led on the ESC. If I pull the esc plug From the Rx the motor/esc beeps...
Help please! I'm pulling my {^+}%#+* hair out!
Edit: I've reversed my thrl channel, no difference. I've turned the Tx on with stick at High to start programming mode, nothing. No beeps.
Seems like the esc isn't initializing for some reason. Nothing in the ESC manual describes my problem.
Comment