got the noddycopter out of storage

[noddyflyer]

decided to work on my cx450pro its been on the shelf for a year. last time i fired it up it sounded like it was going to fall apart bad vibes, shakes, scary noises all round all due to a bent main bearing block. i replaced it with a tarot part and alls well i also got a set or two of ceramic bearings from hk the head bearing kit was used for my 250 tail . the 450 tail kit was installed and everything is real smoooth. ive taken off the scorpion 2221-6 and put on a turnigy typhoon (quieter and runs for more than 3 min ) my last upgrade was the align slant main gear and 12t pinion its cut down the noise to a very reasonable level IMAGE_00020.jpgIMAGE_00021.jpgIMAGE_00022.jpgIMAGE_00023.jpgmy only regret is not buying a tarot kit to begin with....mick

[1chris]

mmmmmm..........and?

[noddyflyer]

i have a 3 blade head and tail to go on. the tail needs a longer shaft (the bit with the hub on) ,just need to find one 5mm longer so i get equal pich in both directions... anybody know of one