Another T Rex 600 set up question...

[Al M]

Hello again everyone. Yet another T Rex 600 set up question. Any help will be greatly appreciated.

I am plugging the electrics into an AR7000, and I am using a DX7 tx. The problem I have is looking at the manuals - AUX1 is for the pitch servo (align ds610), AUX 2 is for the gyro (Spartan Quark) gain wire. I am using a governor (Align RCE-G600). The manual says the second plug from the governor goes into an AUX channel. But there are none spare.

Does that mean I can't use the governor?

Thanks in advance for any advice...

[Andy from Sandy]

I have always seen this as somethng strange with JR notation on their receivers. Spektrum copied it and it is a bit confusing. Why they couldn't have just numbered them 1 to 7 or 8 and left it at that goodness only knows. What I think you will find is you have a gear channel and that is usually used for gyro gain.

[GIXERMAN]

you need to plug gov into aux 2 and throttle channel , then throttle servo in rce g600, then gyro plugs into rudder and gear, then rudder servo plugs into quark.

[Al M]

Ah.. excellent. Many thanks. I now have the gain wire in the gear channel. Problem solved. Cheers..

[Chris Boughton]

Thts the exact problem i had AL M when i first got a nitro i didnt know were it all plugged in then i realised tht the throttle servo goes into the gov, problem solved and from now on it becomes second nature and you know were each and every plug goes of by heart!!!

[GIXERMAN]

No problem AI M

[Andy from Sandy]

No problem AI M

Hey, he might of been thanking me as I told him first. lmfao.