What happens if you short a 12s set up together by mistake...

[Brod]

i done it a few times,only up to 6S though,cell tabs usually burn through..wise move going to EC5's..

[Martyn (Bomber)]

Just wondering if people could upload a picture of their solutions to this issue? I am not sure which way to go on packs for my logo 600, 2 x 5s or 1 x 10s pack.

I use 2x 5s packs for my Fusion but if I had the chance to use a 10s pack like you have with your Logo I would definitely go down that route, Thunderpower do 10s packs in there latest range that will fit the Fusion but for some reason there £349 I can't see them selling many of them.

[yuppyflyer]

I use same EC5 solution as Ben, works great. I have taped 2x6S packs into a single 12S stick for my Logo to make changes really easy.

Did the short on 4mm bullets with 6S one day and it really gives you a shock.

[cjcj1949]

Easy mistake to make. Glad your lipos are ok. Proves that lipos don't go bang when you short them. It is useful to wear glasses at times.

[sunny_manku1985]

Could you show me how you made your 6s in to a 12s pack please? Just considering options here really. The thunderpower packs I believe are priced at £289 for a 10s pack

[Martyn (Bomber)]

Could you show me how you made your 6s in to a 12s pack please? Just considering options here really. The thunderpower packs I believe are priced at £289 for a 10s pack

Here was the one I was looking at, they also do one the same just wide and not long for the Fusion type fitment

http://www.fast-lad.co.uk/store/thun...5-p-14420.html

[sunny_manku1985]

Oh right, I was only looking on midlands site.

[Martyn (Bomber)]

Here's the 2 x 5s (10s 4000mah) nanos I run on my Fusion, as I don't have any use for 5s separately I have mine wired up permanently and charge off the balance leads, works for me