Beast X and Servo Frequency What are the pro's and cons?

[swale]

I'm running ds610's on the cyclic and ds650 on the tail wondering what are the benefits in runnign a higher frequency I have runned 65mhz and 333mhz on the tail as far as I can tell all I have noticed is increased battery draw so went back to 50mhz on the cyclic.

Are there any significant benefits running higher frequencys on the swash?

I dont really wanna risk messing anything up so am a little reluctant to ''experiment''

[jwatts007]

Just run them on there correct settings cannot go wrong then.............

[swale]

not really sure what that is?

Just run them on there correct settings cannot go wrong then.............

[jwatts007]

DS 410
blue - 200
blue - 1520
purple - 165
DS 420
blue - 200
blue - 1520
blue - 333
DS 510
blue - 200
blue - 1520
purple - 165
DS 520
blue - 200
blue - 1520
blue - 333
DS 610
blue - 200
blue - 1520
purple - 165
DS 620
blue - 200
blue - 1520
blue - 333
DS 650
-
blue - 1520
blue - 333

[Chris Boughton]

Running at a higher frequency will make the servo more precise but it can caues the servo to heat up if it does then reduce the frequency!! I emailed the beasx team about this, if any of you want i can post up those emails!

[Gate88]

I'm running ds610's on the cyclic and ds650 on the tail wondering what are the benefits in runnign a higher frequency I have runned 65mhz and 333mhz on the tail as far as I can tell all I have noticed is increased battery draw so went back to 50mhz on the cyclic.

Are there any significant benefits running higher frequencys on the swash?

I dont really wanna risk messing anything up so am a little reluctant to ''experiment''

Dude!

It was 5am when you wrote this!

I am getting seriously worried about your state of mind!

Anyways, I found changing the values didn't make much difference to the flying characteristics except it started shaking when I got too low. the flight lipo lasts slightly longer the lower you go but it's nothing significant so I'd stick to the recommended settings for now.

[waveydavey]

If you need the correct list look no further

Servo List V3.xls

These are for V3 BeastX

[swale]

LoL, suffer with insomnia when I cant sleep i find it best just to get up.

think im gonna just leave at 50hz for the cyclic and 333mhz for the tail

Dude!

It was 5am when you wrote this!

I am getting seriously worried about your state of mind!

Anyways, I found changing the values didn't make much difference to the flying characteristics except it started shaking when I got too low. the flight lipo lasts slightly longer the lower you go but it's nothing significant so I'd stick to the recommended settings for now.

[Gate88]

LoL, suffer with insomnia when I cant sleep i find it best just to get up.

You've got it bad!!!!