Announcement

Collapse
No announcement yet.

trex700n

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • trex700n

    i have a trex 700n and i also have a 611 gyro and bls251 rudder servo.
    just want to know if the 611 and 251 is a good combo for this heli.

    thanks
    Trex 700N DFC Vortex VX1n
    Trex 600N DFC Vortex VX1n
    Trex 500 DFV Vortex VX1e
    Futaba 14sg
    plus some nice planks

  • #2
    The 611 used to be an excellent gyro but its just a little more difficult to setup than ones like the csm720/quark.

    But one you get em set up properly thier damn good. When they came out they were also alot more expensive than the modern equivalents.
    All the best
    Tony.
    Thunder Tiger E700 - Align 700N - Fusion 50 - Align 600N


    Comment


    • #3
      thanks i will give it a go then
      Trex 700N DFC Vortex VX1n
      Trex 600N DFC Vortex VX1n
      Trex 500 DFV Vortex VX1e
      Futaba 14sg
      plus some nice planks

      Comment


      • #4
        perfick lol
        as Tony said , read the instructions for the gyro first and remember the Bls 251 has a different resolution rate you must set this first.

        Comment


        • #5
          the 611 is 760 only so should be spot on for the bls251
          i hope or am i missing something
          Trex 700N DFC Vortex VX1n
          Trex 600N DFC Vortex VX1n
          Trex 500 DFV Vortex VX1e
          Futaba 14sg
          plus some nice planks

          Comment


          • #6
            sounds fine to me its a good gyro :-)

            Comment


            • #7
              Yes your right, the 611 only has the one resolution so there are a limited no of servo that will work with it, the BLS251 should be spot on.
              All the best
              Tony.
              Thunder Tiger E700 - Align 700N - Fusion 50 - Align 600N


              Comment

              Working...
              X