Align 2 in 1 reg

[choppertastic]

I'm thinking of buying an align 2 in 1 but just wanted to know if it will work ok with the servo's rated at 4.8v. Sorry if this is a stupid question but I'm pretty new to all this lipo / regulated stuff.

Thanks
James

[Si_B]

It's supposed to regulate at 5.8v to the servo's, which probably is much higher than a freshly charged 4.8V nimh pack. Which servo's are you going to use ??

[choppertastic]

But is that a no load 5.8 which once servos start working will soon drop off.

Servos are jr 8321s 8700 and a savox on throttle that I can't remember.