Tweet
I am new to nitro and I am about to fix the electrics to the heli. As far as I can see there are three choices: Adhesive hook and loop tape, Adhesive foam with hook and loop and Adhesive foam. What would be the best thing to use?
-
-
Either
I use double sided tape.
x 3 -
I use both, depending on what it is, also use some align velcro straps on rx and esc alsoKev
Comment
-
I use sticky velcro and then an align strap to fix it down, works very well.Paul.
2 x TDR II Bavarian Demon AXON, Pyro Comp 850/50, Kosmik cool 200, Futaba BLS, 15s
TDR Bavarian Demon 3X, Pyro Comp 750/56, Kosmik cool, 14s, Savox: SB-2282SG, SB-2283SG Tail
TDR Bavarian Demon 3SX, Pyro 750/56 comp Kosmik Cool 200, Savox,
Logo 600SE, Bavarian Demon 3SX, Pyro700/52, 80HV,
Logo 480 xxtreme, Bavarian Demon 3SX, Scorpion, Savox, YGE,Comment
-
I use hook and loop. Sometimes I'll add an Align strap to double secure certain units.
Probably a good idea to use Velcro straps too on Nitro as the oil and grease might weaken the glue. Never used Nitro so I can't comment 100%
---
I am here: http://maps.google.com/maps?ll=54.154693,-4.484692Very proud to be an Align-Trex.co.uk Team Pilot!
SABGoblin 700 / V-Bar Blueline 5.3 Pro
Trex 600 EFL Pro / V-Bar Silverline 5.3 Pro
Trex 500 FBL / Beast X
Futaba 8FG
Proud Owner of 2 EGS Awards
Comment
-
On nitros foam for sure, double sided tape doubled up at least. For the gyro use what's recommended and a metal plate if it recommends that.Comment
Comment