Witch Switch??

[G-Bru]

Alright Dudes!

Just got back home from working up Norf all week to find my package containing my Eneloop 800MAh NIMH pack and Futaba switch posted through my door.

Thing is, the Futaba switch is HUGE! (Quantum JR / Futaba Switch Harness Q-SW-0002) The Eneloop pack is smaller than it!

I am looking for a simple small switch to turn my RX on and off without having to plug the battery connector in all the time.

Do you have any suggestions?

TIA

G.

[Gingerr6]

i used this Gryphon Pin Flag Fail Safe Switch GSB-1010P
Did have to swap some wires arround for it to work but does the job on my 600

[PeteStewardson]

Does the Gryphon switch work without a regulator? I assumed you had to have a Gryphon regulator.

[Mark_T]

You can use it with other devices that are equipped for a soft-switch like the AR7100 receiver for example, but I don't think this is what the OP is looking for.

[Andy from Sandy]

Thing is, the Futaba switch is HUGE!

Unfortunately you did not order a "Futaba" switch harness., you have ordered a third party product that will work with Futaba. These are Futaba switch harnesses:

Futaba® Switch Harnesses

You could get a slider switch from Maplins. Cut a servo extension lead in half and then solder the switch in to make your own harness. If you do it without cutting the signal wire then that will help with strain relief.

[G-Bru]

Unfortunately you did not order a "Futaba" switch harness., you have ordered a third party product that will work with Futaba. These are Futaba switch harnesses:

Futaba® Switch Harnesses

Thanks Andy, the SWH7 version is just the one I am looking for, now where to find one??

G.

[Andy from Sandy]

I always start at Inwoods and go from there.

[Gingerr6]

Will work with anything just swap the red and orange wire around on one end

[Andy from Sandy]

Thanks Andy, the SWH7 version is just the one I am looking for, now where to find one??

G.

Ripmax have the part listed as

Ripmax - Switch Harness 1.5 from Futaba - P-R-SSWGS

When I put p-r-sswgs into google I got 3 shops at the top of the listing.

[G-Bru]

Ripmax have the part listed as

Ripmax - Switch Harness 1.5 from Futaba - P-R-SSWGS

When I put p-r-sswgs into google I got 3 shops at the top of the listing.

Awesome! Thanks Dude!

G.

[brin]

or try here Phoenix Model Products Futaba Leads and Switches

[millerman]

dude what made you buy a switch the same size as the TDR canopy LOL