Announcement

Collapse
No announcement yet.

Tail rotor alternitives for shuttle

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tail rotor alternitives for shuttle

    Hello does anyone know of a tail rotor that will fit on a hirobo shuttle or which heli's have a 5mm tail shaft that the rotors fit on.
    thank you
    Citizen: 280

  • #2
    Yep:
    I got about 2/3's of one they cost a paket Quick UK still do the housing, drive spindle, pitch slider, tail hub, bell crank, body, and guide wheele. Tis about £150 for the whole set without blades. the shaft is about £12 on this page http://www.quickuk.co.uk/acatalog/r_index.htm

    Regards Steve
    Steve...

    Outrage RC Field Rep


    Now enhanced with some more EGS's....

    Comment


    • #3
      Try the Sceadu tail assembly - it should fit the tail boom (please check first though), is also Hirobo, and is a far better design than the Scuttle.
      JR Vibe Fifty fb (YS56)

      Comment


      • #4
        Somewhere on here I posted a thing about an Ebay bloke in Germany with a link to his ebay shop, he does shuttle tails and stuff, and his stuff is good and good value too. Think its in the good sellers / buyers forum, have a look.
        -I don't crash, I just land with enthusiasm.

        A couple of 600n's with stuff on them that makes them fly..
        A 550 fbl with even more stuff on it to make it fly
        And a Mars 470 which needs stuff putting on it to make it fly

        And a DX8 too

        Comment


        • #5
          Originally posted by Jamez View Post
          Somewhere on here I posted a thing about an Ebay bloke in Germany with a link to his ebay shop, he does shuttle tails and stuff, and his stuff is good and good value too. Think its in the good sellers / buyers forum, have a look.
          If that's the bloke that sells metal wash-out arms/bases for Sceadus for about £17, then I would suggest you stay well clear. The prices are good, but the manufacturing quality is sxxxte! I've got one of those Sceadu washout assemblies and only used it for 2 flights - black oily slick all over the main shaft due to steel-on-steel rotation. That block needs a brass bush, as per the original Hirobo part and the Quick UK upgrade.
          JR Vibe Fifty fb (YS56)

          Comment


          • #6
            This is the guy I mean

            http://search.ebay.co.uk/_W0QQsassZsegawa78

            And I see what you mean about the Sceadu wash out, it don't look like its got a brass bush in it

            http://cgi.ebay.co.uk/ALU-Washout-Mi...QQcmdZViewItem

            But the Raptor one has

            http://cgi.ebay.co.uk/ALU-Washout-Un...QQcmdZViewItem

            and I have had a swash plate of him for my old shuttle and it was top notch. A couple of others on here have had stuff from him as well and they agree. Can't see why the wash out hasn't got a bush in its all a bit odd.
            -I don't crash, I just land with enthusiasm.

            A couple of 600n's with stuff on them that makes them fly..
            A 550 fbl with even more stuff on it to make it fly
            And a Mars 470 which needs stuff putting on it to make it fly

            And a DX8 too

            Comment

            Working...
            X