Announcement

Collapse
No announcement yet.

Advice please- use of 3GX, TotalG, VBar and BeastX as Rx

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Advice please- use of 3GX, TotalG, VBar and BeastX as Rx

    Hi all.

    I'm about to start a new build and have bought an Align 3GX to try.

    I want to use it as a Rx with 2 satellites, but have heard anecdotes that it is better to use a dedicated receiver on larger helis rather than allowing the FBL controller to do everything. I love the idea of a very tidy install with minimal wiring.

    Has anyone got any fact based reasons one way or the other, or shall I just go for it and try.

    Thanks

    Alex
    Synergy N5C with 3GX on the bench
    Trex 500 ESP FBL BeastX -soooooooooo fast
    Trex 700 LE Beast X'd and no sticky out bits
    Velocity 90 BeastX FBL-the love affair has begun!
    Newton Abbot Heli CLub where the sun always shines

  • #2
    you'll have no failsafe on throttle with the 3gx unless you use a main rx, Align apparantly have an update in the pipeline for the uk market but no news on release yet. I fitted a main rx to mine simply because of bmfa guidelines for comps and public demo's etc and the thought of watching my heli fly off following a signal loss. Mikado and others released the update after releasing the product too, as the rest of the world are not required to have failsafe I believe.
    Last edited by 0h5h1t; 04-07-2011, 06:25 PM.

    Comment


    • #3
      I am using SBus/VBar on my 700 and 600 with no problems, creates a very neat install. I was led to believe that the 3GX has forgot a throttle fail safe, or people are having problems getting it to work, if this is the case it would be cause for me to run a RX.

      Chris.
      Flying most weekends at CMFA - Trex 700 V-Bar, Trex 600n V-Bar, Trex 250 BeastX

      Comment


      • #4
        No problems using dual satellites large helis,i run the V Bar and 3GX with no issues.

        3GX firmware update 1.1 is out in a week or two and among other improvements it sorts the failsafe according to Pm i had from them.

        Quote
        --------------------------------------------------------------------------------

        AlignRC wrote on 06-29-2011 11:44 PM:
        Hi Chris, as for the lower autorotation gear I will have to check and see if it works. I have not tried as I'm using the stock setup. As far as the throttle, there will be a update firmware that will address this within the next week or so.

        Well I check on that gearing and see if it is possible to do.

        Best Regards,
        Jeff Fassbinder

        Align - Conquer Your heart

        Comment


        • #5
          I use 2 sats with all my helis with a vbar and I fly high and farrrrrr and have no issues

          Sorry, no fact but it has worked for ages
          + 7 x Eddies finest EGS's


          Comment


          • #6
            Thanks for the answers- clears that up for me
            Synergy N5C with 3GX on the bench
            Trex 500 ESP FBL BeastX -soooooooooo fast
            Trex 700 LE Beast X'd and no sticky out bits
            Velocity 90 BeastX FBL-the love affair has begun!
            Newton Abbot Heli CLub where the sun always shines

            Comment

            Working...
            X