sservo

[Rotarman3D]

I have just bought a 611 and 9256 but I need a servo for the Cyclic, what do you guys reccommend?

[nightstalker]

What heli mate?

[Rotarman3D]

What heli mate?

Ooops sorry mate. for my Trex 600 pro and my Knight 50. Haven't got the Knight yet but getting the kit together ready

[nightstalker]

so you will be looking for 3 servos, well the best iv seen that work awesome are 9255s or if u can get them 9155s, loads of torque and the 9155s are fast,
so it all depends on how much you have left after you bought your new toys

[robgt]

Cost conscious choice could be a Futaba 3152 (£25 each).
Higher end could be Futaba 9451 (£68 each).
Both have pretty good centering, which is key on CCPM helis.
There are other options of course...
Cheers,
Rob

[warboysastro]

I've just put S3152's on my 600CF-E cyclics. 5kg is more than capable for what I want, and more money left over for other goodies

Cheers - Rob

[robgt]

They're a damn good servo for the money, for sure.
I still have them in my Sceadu Evo 50 - going strong!

Cheers,
Rob

[abyiss]

if you a PRO class 3d flyer..the get the best servos money can buy,
,((9451's.are a bit of an over kill for a knight 50..


3152 are a very good entry level servo's....you buy 3 @ the cost of a better servo,

its realy down to how must you willing to spend...to how much perfection you looking for on the sticks.
hope that has helped.


one good thing dude..you got the bollocks of gyro's...611 combo..and 601 combo put the rest to same.

[Rotarman3D]

cheers guys. I'm looking for absolute perfection Abyiss mate Robgt what's that piece of equiupment you have on your Rex mate? The thing that gives you 10 seconds of Glow Time?

[robgt]

Thats the Align 2 in 1 regulator

Cheers,
Rob

[Rotarman3D]

Thats the Align 2 in 1 regulator

Cheers,
Rob

Where can I get one from and how much are they matey?

[robgt]

Real raptors, skyline models, midlands, etc, all sell them.
Without Lipo they're around £27.
With Lipo they're around £37 - but it's a low capacity lipo...

I called Mike at Aurorra and asked him to make me up a Revolution 2S2P receiver pack for my heli's, based on the 2S1P packs he already sells. Very accommodating chap
It's basically a 2S pack that has its capacity doubled (the 2P part).
Cheers,
Rob

[nightstalker]

I have the 2 in 1 with the align 1900 lipo and i get 5 flights and still have 1 green light on, i just charge it up again as i don't want to take the risk, but its known that some can get 7 flights out of that battery but that's at there own risk

But the 2 in 1 is a great item and all i want to do now is make my starter mobile and il need with me is heli tx fuel and starter

[robgt]

If you're running fast digital servos and using Spektrum radio gear, power consumption increases quite a lot. 5 flights sounds reasonable though. On my setup, I'd probably recharge it after 4 flights, just to be on the safe side.

With my Revo pack, I don't worry about recharging it before 7 or 8 flights. Which covers a day as I fly other models too

Good to know flight numbers off that Align pack though - ta!
Cheers,
Rob

[Rotarman3D]

Real raptors, skyline models, midlands, etc, all sell them.
Without Lipo they're around £27.
With Lipo they're around £37 - but it's a low capacity lipo...

I called Mike at Aurorra and asked him to make me up a Revolution 2S2P receiver pack for my heli's, based on the 2S1P packs he already sells. Very accommodating chap
It's basically a 2S pack that has its capacity doubled (the 2P part).
Cheers,
Rob

think i'll get one, would you guys recommend one?