Announcement

Collapse
No announcement yet.

Choice between preditor or rappy

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Choice between preditor or rappy

    Hi guys just wondering what you think about these two helis, which would you buy . Century preditor 60/70 about 100 quid more exs or the Raptor 60 . Difficult decission cant make my mind up . Any one got exsperiance with both flying caracteristics . Keeping progressing into 3d in mind
    REGARDS JAMIE

    Knight 50,50 hiper,hatori pipe,gy401+9254,ttcarbon blades futaba ff7fast 2.4 ghz set up with 3152 digi s all round and a rev loc 10
    450 rex standard setup
    Phoenix sim...
    Plus two gliders and one pits special biplane

  • #2
    Predator beats a raptor 60 hands down....

    Well if its like the Predator 90's and gassers the quality is there and there fine machines. not had the Predator 60 only the 90 and Gasser. But with Century you get the quality....

    Expect people to point you towards the 50 size machines any time now...

    50's power to weight etc is why most people use them for 3D and there cheaper to fix...
    Mark
    www.uavaerialservices.co.uk
    BNUCs - Operations certified
    CAA - Permit for Aerial Work

    Comment


    • #3
      So if i blinged up my rappy 30 and stuck a 50 hiper in it , good mix for 3d . Or should I go for the preditor and stick a 70 in it. Dont have much experiance with this and the hunger for power is biting bad. Dont mind the cost realy
      REGARDS JAMIE

      Knight 50,50 hiper,hatori pipe,gy401+9254,ttcarbon blades futaba ff7fast 2.4 ghz set up with 3152 digi s all round and a rev loc 10
      450 rex standard setup
      Phoenix sim...
      Plus two gliders and one pits special biplane

      Comment


      • #4
        Originally posted by jamiesawyer28041978 View Post
        So if i blinged up my rappy 30 and stuck a 50 hiper in it , good mix for 3d . Or should I go for the preditor and stick a 70 in it. Dont have much experiance with this and the hunger for power is biting bad. Dont mind the cost realy
        Okay for 3D most people here are going to say go 50 machine and it will be either a Knight 3D or T-rex 600N

        wait for their replys....

        But I'd leave the Raptor 30 alone.. might be time for a fully kitted out 50 machine.

        which is the best who knows everyone will give diffrent reasons for the machines they use so just read through what they recomend....
        Mark
        www.uavaerialservices.co.uk
        BNUCs - Operations certified
        CAA - Permit for Aerial Work

        Comment

        Working...
        X