Easy Autos

[cjcj1949]

I've been playing with throttle and pitch curves ready to try idleup. I've currently set full throttle for hovering and disabled the governor mode on Phoenix. Autos seem quite easy now on a 450. According to Phoenix the blades are going at about 3000 revs. I'm assuming this is not a good idea in real life. Hovering height control is good though.

Chris

[Planehazza]

3000rpm on a 450 is fine for 3D, as long as you're running decent CF blades. I would NOT run woodies at that speed unless you like wooden shards flying at you!