Tweet
as above after some advice into starting to fly helicopters,being a complete newby! i got the razor cx it seems to be ok. i also got a simulator(aerofly pro deluxe,platinum with remote controll) to practice on. right the problem i got is when i fly the razor its ok but when i give it some throttle say to pull up the fly bar hits the blades and breaks them,i asume the flybar hits, or the blades hit each other? ive broke 3 set,s in flyte only seems to happen when i power up..when comming down then go to go up and wack they hit.. any advice guys please. some1 told me thats a common thing on 4 bladed heli,s any help guys PLEASE ps thanks for your advice last time
-
-
any1 please? -
Is it only the upper set of blades that are getting broken? The only way the flybar could do this is if the mounting is rotating. Are the blades breaking in the middle or at the root? Just trying to establish if the problem is mechanical or some structual failure in the blade.Ant
Pilot of scale earth repelling objects
Comment
-
The flybar should be nowhere near the blades (it should be at 90 degrees). Are you sure nothing is loose allowing the flybar to rotate in flight??Cheers,
Simon
--------------------------------------------
Trex 700N & E
Futaba 18mz and some planks !!
x 2Comment
-
hey guys, no nothing is lose.just checked the top blades as the tips break off. the bottom blades seem to have black marks on them. like the flybar rubbers are hitting them. they do hit and break in flite. only thing i can see really is the blades seem to have a lot of flex in them..could it be because i give it too mutch throttle to go up when its comming down. cheers for your help peeps.Comment
-
Can you adjust the tightness of the blades ??. I'm just wondering if the blade are too loose, and are rotating in flight and causing the blades to go out of track. They shouldn't be enough flex in the blade to allow them to bend up and hit the flybar.Cheers,
Simon
--------------------------------------------
Trex 700N & E
Futaba 18mz and some planks !!
x 2Comment
-
hi. they can be tight but was told to leave them move about? ill try and tightn them up.they are sloppy and move about just buy moving the helli about. being counter rotar jobbie. cheers againOriginally posted by Si_B View PostComment
Comment