Announcement

Collapse
No announcement yet.

Savox tail servo

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Savox tail servo

    i got a savox tail servo that only recenters one way is that right?
    i.e if i go left then back to middle the servo will re center but if i go right then back to middle it stays right i have to throw the stick way left to centre the servo again....is this norm and when the tail is spinning it will sort it self out??
    RAPTOR 60
    TREX 500 CF, FBL
    MSR-X
    JR XG7
    __________________________________________________ ______________________
    http://www.hdrcmc.co.uk/index.htm

  • #2
    try just the servo with no gyro
    Cheers Paul

    sigpic
    Citizen #42

    Comment


    • #3
      Originally posted by Geek View Post
      try just the servo with no gyro
      ​SWRCH , Oh.. And a Helix 700 Gasser, Hv with SK540.....with SAB HPS head.

      Comment


      • #4
        Si, likely becuase your in heading hold on the gyro, as the guys say, just plug straight into the rx to double check operation and centre point.

        Comment


        • #5
          going to try this now back in 5
          RAPTOR 60
          TREX 500 CF, FBL
          MSR-X
          JR XG7
          __________________________________________________ ______________________
          http://www.hdrcmc.co.uk/index.htm

          Comment


          • #6
            have a look here this is what its doing. seams to be ok on uther chanel but its only moving a little on the uther chanel>?
            [ame=http://www.youtube.com/watch?v=wHRSRgncwvY]YouTube - Savox servo test[/ame]
            RAPTOR 60
            TREX 500 CF, FBL
            MSR-X
            JR XG7
            __________________________________________________ ______________________
            http://www.hdrcmc.co.uk/index.htm

            Comment


            • #7
              That servo want centering properly anyways, have you done as above and plugged directly into rx, and taken the gyro out of the equation?
              Kev




              Comment


              • #8
                ok so servo works fine without gyro...so its normal then? just that when im tring to hover it sticks and im fighting the controls...ahhh cant wait to get up the club and have somone give me a hand...slowly losing interest in hellis seams to be just a money pit...
                RAPTOR 60
                TREX 500 CF, FBL
                MSR-X
                JR XG7
                __________________________________________________ ______________________
                http://www.hdrcmc.co.uk/index.htm

                Comment


                • #9
                  Jthr servo needs centering, have you set the gyro up, and set the stops on your gyro, the servo generally doesn't centre in hh mode, only in rate mode, what gyro is it
                  Kev




                  Comment


                  • #10
                    Stick with it mate. The electronics are a bit awkward - for a dullard like me anyway - but once you get the hang of it it's OK. Plenty of help on here too. Setting up is the "be-all" with helis.
                    Mike
                    TRex 600NSP, OS55, MicroBeast
                    TRex 500ESP
                    TRex 450Sport,TT, Scorpion 2221/8,
                    Futaba 14SG Optifuel 20%
                    Member RCHA BMFA BMAC BALPA BARC

                    Comment


                    • #11
                      Gyro is a etronix advance and nop not set up but have tried
                      Last edited by horsham rc; 10-02-2011, 10:43 PM.
                      RAPTOR 60
                      TREX 500 CF, FBL
                      MSR-X
                      JR XG7
                      __________________________________________________ ______________________
                      http://www.hdrcmc.co.uk/index.htm

                      Comment


                      • #12
                        Originally posted by horsham rc View Post
                        Gyro is a etronix advance and nop not set up but have tried
                        Never heard of that gyro lol, the tail is so important on a heli, and if not properly set up, causes a right pain in the ass for trying to fly
                        Kev




                        Comment


                        • #13
                          We can't all afford a futaba or uther branded gyros so I took the one off my raptor witch I was told wasn't abad gyro... Just as people havnt heard of them dose that make them a bad gyro??.. I refuse to put any more money in to this hobby..: apart from fuel.!!!!!!
                          RAPTOR 60
                          TREX 500 CF, FBL
                          MSR-X
                          JR XG7
                          __________________________________________________ ______________________
                          http://www.hdrcmc.co.uk/index.htm

                          Comment


                          • #14
                            Originally posted by horsham rc View Post
                            We can't all afford a futaba or uther branded gyros so I took the one off my raptor witch I was told wasn't abad gyro... Just as people havnt heard of them dose that make them a bad gyro??.. I refuse to put any more money in to this hobby..: apart from fuel.!!!!!!
                            Easy there tiger, I never once said it was a bad gyro, and I didn't say you should go out and by another one, I personally have never heard of it, a tail servo and gyro combination is normally where people spend a lot, as this is what will lock the tail in.

                            You must get the gyro and tail servo set up correctly, else you a fighting a battle that your heli will win every time, look on YouTube of how to set up your tail and gyro correctly, as your tail servo for starters is quite a way off the mark
                            Kev




                            Comment


                            • #15
                              Rotor world issue 52. Review on the etronix gyro
                              RAPTOR 60
                              TREX 500 CF, FBL
                              MSR-X
                              JR XG7
                              __________________________________________________ ______________________
                              http://www.hdrcmc.co.uk/index.htm

                              Comment

                              Working...
                              X