Female Balancing Plug

[lgray88]

Can you get such a thing on the market, i am looking for a way to conect my dx8 voltage telemtry to my lipo without having too gash on insulating tape. I thought i could attach to a female balancing plug then i can just connect to the male plug on the battery, any other ideas would be great

Many Thanks

[pgkevet]

they re had to find as a separate item but look at balance adapters/converters and cut off the other end.

[Mark_T]

Generally easier to wire it into the ESC battery connector so you never have to worry about remembering to connect/disconnect it each time.

[lgray88]

The voltage telemetry is only going to the receiver battery pack, i fly a nitro so no ESC. and unfortunately the plug on th terminal is so small that i cant fit in my wires from the telemetry unit

[Mark_T]

Are you using a regulator?

If not then just connecting the pack to the receiver is going to get you the voltage on the DX8 telemetry anyway.

[lgray88]

Nah but that will give me the rx voltage, i want too keep tabs on the voltage in the battery as the 2in1 align unit drops the 7.4 volt pack down too 4.8v ( i think for the servos and rx.

[Mark_T]

Nah but that will give me the rx voltage, i want too keep tabs on the voltage in the battery as the 2in1 align unit drops the 7.4 volt pack down too 4.8v ( i think for the servos and rx.

The 2-in-1 is a regulator and it drops the voltage down to around 5.8V, but I see your problem.

It might be better to replace the battery connector and the socket on the 2-in-1 with something better and connect the sensor wires to the new connector on the 2-in-1 at the same time.

[Balders]

Can you get such a thing on the market, i am looking for a way to conect my dx8 voltage telemtry to my lipo without having too gash on insulating tape. I thought i could attach to a female balancing plug then i can just connect to the male plug on the battery, any other ideas would be great

Many Thanks

How many S? I've got some 6S kicking around possibly...or has been said, use a board.

Here's a photo, let me know if any use...

[Red3]

i have 3s femail jst conectors ?

[lgray88]

its only 2S, what if i used a Y-Harness where the battery connects to the 2in1?