Epoxy or JB Weld

[spurdy]

Need to glue some Tail pushrods/ends ,and am wondering whats is the best between the too for best results
my epoxy i have at the mo is only 5min /30min was recomended in manual , how quick does jb weld cure

[Disc]

JB weld leave over night to cure

[Tom Burgess]

Hey Ian,

Use the rods themselves to rough up the inside of the carbon tube before you glue them. I use 30 min epoxy

[Martind]

Jb weld is good in 4hrs but epoxy will be ok

[Planehazza]

I rough up the ends of the CF tube with some wet and dry, then use expoxy. Make sure it's firmly set as it takes a while to fully cure. I've got 30min stuff, wish I had 5!