Help needed with my Revlock

[chris427]

I have just bought a Revlock 20 for my second heli after getting on really well with the Revlock 10 on my Airskipper. I tried to instal it tonight but it will not pick up the sensor. It doesn't matter where i put it it just doesn't want to know. I had a brain wave of checking the unit out on my Airskipper as it was all working fine yesterday. I took the sensor and servo leads off it and plugged in the 20 inplace of the 10. I didn't move the sensor or anything else so it should have worked fine. The set up on the skipper will not recognise the sensor either but will let me by pass it and set the headspeed i need and the offset too. I then took it off and plugged the 10 back in and put all the leads back on the same as they came off and now that will not recognise the sensor either!! Nothing has moved or changed other than unplugging the 10 and plugging in the 20 and then swapping them back. I'm baffled as to what is wrong. Anyone got any idea of my problem. I now have 2 revlock units that will not pick up the sensor and i'm a little bit peed off to say the least!! The only thing i can think of is that the 20 is faulty and has knackered the sensor on the 10 set up now??

[Nutz]

I see you have 2 revlocks, don't you have another sensor to test it with?

[chris427]

I have just been out in the garage testing the things. I have a spare magnet so it put that on the bench and passed the Airskipper sensor over it and nothing!! If i put the sensor on top of the magnet it sometimes works but about 1 in 20 times. That can't be right. I then swapped the sensors over to the one from the 20 and nothing!! Not a glimmer so looks like 2 faulty sensors and a faulty 20 unit.
I will get 2 new sensors tomorrow and try again.