mCX2 help...Please

[leons]

I have just changed the inner shaft on my mCX2..

The Heli will now not lift off..The skids will move it around on the floor..

All the screws are tight..the "drive cogs" are turning in the correct directions..everything appears to be fitted correctly.

The Heli seems to lose power as the stick is advanced..but nothing is loose/slipping when checked .

Any advice/suggestions appreciated..

Thanks..Leon

[tiddler]

Are you sure you've fitted the correct blades? i.e. Top blades should have their leading edge facing the direction of travel.

[R1stu]

did you put the bottom blades back on the pegs?

[leons]

did you put the bottom blades back on the pegs?

Yes..did that...

[leons]

Are you sure you've fitted the correct blades? i.e. Top blades should have their leading edge facing the direction of travel.

Wait one...trying to work it out

[leons]

Are you sure you've fitted the correct blades? i.e. Top blades should have their leading edge facing the direction of travel.

They say there is one born every minute....

Thanks, I did not know there is a right/wrong way.... tried to line the writing up......