CSM sl310 gyro

[millsy]

has anyone tryed csm sl310 micro gyro and futaba servo S3154. im having trouble setting it up. Im thinking on getting a csm560 micro.

MILLSY

[3dbasher]

what exactly is the problem your having?

[millsy]

Well in heading hold mode the servo keeps on creeping over where you put it. the gyro gain is 50% and the gyro sens is 45%. In the hover when i put in say left input the tal goes to the left and comes back, its like a yawing its horrible.
MILLSY

[3dbasher]

Well in heading hold mode the servo keeps on creeping over where you put it. the gyro gain is 50% and the gyro sens is 45%. In the hover when i put in say left input the tal goes to the left and comes back, its like a yawing its horrible.
MILLSY

firstly i wouldnt use gyro sense just put it on a normal switched channel, what model is it in? haven't got any binding or slop in the tail pitch system have you? other than that make sure you've not got any rudder trim in or subtrim on rudder then cancel any drift out in normal mode with mechanical adjustment after doing the quick setup again.. oh using thee quick trim function can cause issues too

[millsy]

Hiya theres no slop or binding in the tail!!! il turn off the gyro sense we see there en. thank you all for yur coments.

MILLSY