Century hummingbird thottle rudder help?

[jakegazzard]

im setting up the humming bird for my brother, done all cyclic's and pitch and throttle curvs but cant get the rudder and throttle to work, im using the century rx and my ff9. The throttle and gyro is on a mixer board, any ideas? Thanks.

[jakegazzard]

Throttle is reversed as needed on futaba, both motors connected. hope this helps!

[unwind-protect]

Usually you need to get the ESC to initialize first. Try moving the throttle trim down, or increase the throttle ATV. Take care when fiddling around with throttle settings!

[glen_j]

Usually you need to get the ESC to initialize first. Try moving the throttle trim down, or increase the throttle ATV. Take care when fiddling around with throttle settings!

make sure your endpoints /atv are at 100. also take the main blades off or move the motor away from the main gear to avoid any accidents jake

[jakegazzard]

still no luck

[jakegazzard]

in the manual it says its a mixer board and a seperate gyro, but this one has nthe gyro on the mixee board so its 2 in 1

[jakegazzard]

Sucsess!!! I didnt plug a gain in!!!!