Electrics advice please boys and girls

[rsmuppet]

Right then , pay day is a mere hand full of days away and that can mean onlt one thing . Time to get a heli , so i think i will be taking Nick (Synergyn9) up on his very kind offer of his Trex 600 , (thank you everyone else ) so i'm going to be needing some electrics to go with . Obviously not having flown a heli for quite some time i'm going to be hammering to sim before a attempt to take to the air and when i feel my dangley bits have grown enough that i finally do i will be fitting training gear. So i'm after advice for servo combo's and gyro advice. I've seen that Fast-lads are doing a deal on Quark gyro and sero deals and think this will sort one of my problems unless anyone can advise me against and offer an aternative .
Thanks in advance
Al

Ps is there still a need to fit voltage regs for the tail servo of is this onlt applicable when flying electric? Sorry if these questions seem daft

[sacko]

Spartan Quark
DS650 for tail
DS610 on Cyclic
S3152 on throttle
Align 2in1 regulator
AR7000 Rx if Spektrum
CSM Revlock 10

[moonmanflyer]

To be honest you cannot go wrong with the align servos, DS610's on the cyclic, a 620 or 650 on the tail, a GP750/780 gyro and an align 2 in 1 reg.
MKS servos will also soon be avaliable in the uk, and some of the specs of them are mega, but maybe a bit too much for a starter when you consider getting you in the air
Good luck and have fun

[Asid]

The Spartan quark + mks servo combination is very interesting

it's on my list

[Jamin_00]

Bluegarry has a set of 8715's an 8900 for sale that are nearly new and a very good price for a set of top dog servos.

Bls servos is my preference

[rsmuppet]

thanks for the advice chaps , having had a look at the GP780 i see a lot of people complaing about tail wag when using it that they didn't have before, are they a bugger to set up or is it a simple case of incorrect set up ?
Spartan quark with BLS980 or Gp780 with DS650 or any other combo lol
Cheers Al

[rsmuppet]

Bluegarry has a set of 8715's an 8900 for sale that are nearly new and a very good price for a set of top dog servos.

Bls servos is my preference

funny you should say that i was just on Fast-Lad having a look at BLS servos ,Have you any idea how much he's looking for them ?

Cheers Al

[Asid]

I have a DS650 + Spartan 760. The servo is running <5.8v. This servo Runs quite warm.

The mks bls980 is what I want to try next.

[rsmuppet]

I have a DS650 + Spartan 760. The servo is running <5.8v. This servo Runs quite warm.

The mks bls980 is what I want to try next.

i would like to try a bls980 if funds allow that it

[Jamin_00]

funny you should say that i was just on Fast-Lad having a look at BLS servos ,Have you any idea how much he's looking for them ?

Cheers Al

They are in the rcha ads bit.

[synergyn9]

Al, Trex 600 sat here waiting for you .

Drop me a PM whenever, off on a jaunt out today over the Lancs border into enemy territory (Yorkshire!)