Been clearing out a few things, and had this Century Hummingbird Pro CP - it few quite well back in the day, but sadly its not been used for a few years now.
If im not mistaken, this is nearly the same as the Eflight Blade SR?
If anybody wants it for spares, or project to get it back up flying again, you're more than welcome to have it, otherwise its going in the bin
Needs a bit of work on it - eg new sticky foam pads needed for servos and gyro/mixer board (although they have never been removed), new battery needed (the old NiMh battery holds about 3 seconds worth of juice! lol), flybar paddles need aligning, and may need new main blades (although current ones will still get it airborne)
It comes with -
All original electronics (CCPM setup)
Upgraded Motor cooling fans (nice purple colour)
Upgraded CNC metal head block
Upgraded CNC Purple main plank (everything is mounted onto this)
1x spare main gear
2x spare tail blades (technically 4 as both blades are 1 unit)
It was originally 35Mhz and comes with this Rx - although last flight I did I put my 2.4Ghz on it and worked fine, so just need to re-attach the 35 Rx (supplied), or put your own 2.4 Rx on it
If im not mistaken, this is nearly the same as the Eflight Blade SR?
If anybody wants it for spares, or project to get it back up flying again, you're more than welcome to have it, otherwise its going in the bin
Needs a bit of work on it - eg new sticky foam pads needed for servos and gyro/mixer board (although they have never been removed), new battery needed (the old NiMh battery holds about 3 seconds worth of juice! lol), flybar paddles need aligning, and may need new main blades (although current ones will still get it airborne)
It comes with -
All original electronics (CCPM setup)
Upgraded Motor cooling fans (nice purple colour)
Upgraded CNC metal head block
Upgraded CNC Purple main plank (everything is mounted onto this)
1x spare main gear
2x spare tail blades (technically 4 as both blades are 1 unit)
It was originally 35Mhz and comes with this Rx - although last flight I did I put my 2.4Ghz on it and worked fine, so just need to re-attach the 35 Rx (supplied), or put your own 2.4 Rx on it





Comment