Tweet
hi all what is the best way of removing thread lock from bolts is there any liquid soluion you can get thanks tone
-
-
Methylated spirits from Halfords
cleans all oily residue from fresh bolts, and will remove threadlock too
-
remove thread lock from bolts
i take it will take off dried nut lock thanks toneComment
-
I use engine degreaser to clean and remove any threadlock/dirtGoblin 700
Comment
-
I use a sonic cleaner that I bought of the bay for £20. Works a treat for that sort of thing. Just add hot water and a little Swarfega and your good to go.Comment
-
acetone is also very goodPaul.
2 x TDR II Bavarian Demon AXON, Pyro Comp 850/50, Kosmik cool 200, Futaba BLS, 15s
TDR Bavarian Demon 3X, Pyro Comp 750/56, Kosmik cool, 14s, Savox: SB-2282SG, SB-2283SG Tail
TDR Bavarian Demon 3SX, Pyro 750/56 comp Kosmik Cool 200, Savox,
Logo 600SE, Bavarian Demon 3SX, Pyro700/52, 80HV,
Logo 480 xxtreme, Bavarian Demon 3SX, Scorpion, Savox, YGE,Comment
-
Blowtorch
Very Proud Owner of 1 EGS!!!!
_____________________Comment
-
Blowtorch, i agree with thatComment
-
wind a nut on and off a few timesChris 'CHUNK' Newby
Trex 700E DFC_Align BL800MX_CC160HV_BL700H_BL750H_Spartan VX1n_Haiyin 5000mAh 12s
Trex 700E DFC_Align BL800MX_CC160HV_BL700H_BL750H_Spartan VX1n_Haiyin 5000mAh 12s
NAHC-Newton Abbot Heli Club, check out the website at WWW.NAheliclub.org.uk
ALIGN-TREX.CO.UK team pilot
LYNX team pilot
SPARTAN team pilot
Dx18Comment
-
A soldering iron and a wire brush works wonders,,,,Sab Goblin 570
Sab Goblin 500
500E Pro dfc
450 Pro dfc
Blade 300X
DX9Comment
-
I use a small (25x10mm) steel wire brush.Henseleit TDR
V-Bar x2
SAB Goblin 700 V-Bar
SAB Black Nitro V-Bar YS91 Tareq SRX
T-Rex 700e DFC V-Bar
T-Rex 700N MAJ DFC V-Bar YS91 Tareq SRX
Synergy N7 V-Bar OS105 HZ-R
Synergy E7se V-Bar
Synergy N5c FBL V-Bar
Gaui NX7 V-Bar YS91 Tareq SRX
T-Rex 550 E FBL V-Bar
Gaui NX4 V-Bar
V-Control
Proud owner of TWO!! Platinum Stars!
Comment
Comment