2 in 1 on a raptor

[derrick]

Hi all want to fit an align 2 in 1 on my raptor 50, has anyone got any pics on how and where to mount it, there don't seem to be anywhere really sutable, not many flat surfaces.
Del.

[raptorheli2]

i just got one today and started to fit it for a mate.

for the moment i've got the reg underneath the front tray, battery on top and RX ontop of that. i think the button will go beside the engine but not sure how yet.

to make matters worse i also need to squeeze a 601 and GV1 on there.

cheers

[ddracer]

I have done the same.

[derrick]

Looks like i will be doing it that way, was going to start it tonight, but it looks like i will be flying in the morning so i will wait till the weekends over before i begin fitting it. what lipo have you fitted and how many flights are you getting.
Thanks for pic.
Del.

[Mark_T]

I'm away at the moment so I can't post any pictures, but one option is to remove the top loop at the front then mount the 2-in-1 flat against the vertical surface. I then have the battery under the front tray.

[Birdie4x4]

This is how I did mine, hope it helps.

[gramey]

If all else fails you could buy the rest of the heli to go with the regulator !

[derrick]

If all else fails you could buy the rest of the heli to go with the regulator !

I have an outrage why would i want to go backwards

[StreetDragster]

See this thread...........

http://www.rcheliaddict.co.uk/speed-...-inverted.html

I didn't want to mount the 2in1 inverted, as it has a heatsink on the top and i believe if its inverted, heat comes out the fins, and straight back into the unit. So i mounted it on a little 90 degree plastic moulding (from B+Q) so it was side on, this also allowed the fitment of a satalite reciever to the other side of the bracket.

Thanks

Matt