Servo Help

[joe.lel]

Hi Guys,

Need some help.

Wanting in the near future to upgrade the servos on the Raptor30.

Tail is fine as i have a GP750 and DS650 on there.

I want to upgrade the rest as they have some real chepo servos on there at the moment. The only metal gear one on there is a HS645mg on the pitch, which is way over the top.

So what do you recommend?? I am not doing any sort of 3d etc, just some slow circuits at the moment, but want to future proof it a bit for when i get better, stall turns an odd loop etc. LOL.

Looking at the Align DS610's, and a DS520 for the throttle.

Are there an cheaper options that will serve my requirements better??
Or are these the best for what i should need at the moment.

Cheers

Joe

[Rctintin]

Take a look at this sale, the BLS451 servo's are fantastic, and £105 is dirt cheap for 3 of them. Also Dumb Thumb it is a trusted guy on here, so there wont be a problem with them.

http://www.rcheliaddict.co.uk/sale/3...-volt-reg.html

[rapidgaz]

futaba 3050s are a good choice and a little cheaper, and should last you fa quite some time, and are nice and reliable, also nowt wrong with the 610s but more expensive,

[rapidgaz]

Take a look at this sale, the BLS451 servo's are fantastic, and £105 is dirt cheap for 3 of them. Also Dumb Thumb it is a trusted guy on here, so there wont be a problem with them.

http://www.rcheliaddict.co.uk/sale/3...-volt-reg.html

thats not a bad deal, so a thumbs up for them

[joe.lel]

Cheers Guys, will do some looking at the mentioned items

Is a DS520 OTT for the throttle??

[rapidgaz]

yes is ok if it fits, you might need an adaptor plate, or use a futaba 3152, good enuff for the job and no adaptor plate needed, and a little cheaper