revlock 40 help

[loopking]

ive fitted a revlock 40 on my n9 but am having trouble getting the sensitivity right it makes my engine run rough and the tail is twitching all over the place and when in flight , say when doing a loop when you come out of it the engine revs up then settles it doesnt keep it even
can anyone tell me what i may be doing wrong
many thanks loopking

[waveydavey]

What is the gain set at. I had problems getting the engine to stop hunting and I had the gain set too high. Are you using the cyclock along with the accelerometer?

[sooren]

Yes Loopking is using the Cyclock with the Rev 40 - I was out with him yesterday.

I also have the same set up on my 600 and I cant feel the pitch being added or taken off in loops - my engine also over runs when exiting a loop

regards
Paul

[loopking]

yes im using cyclock and accelerometer ive tryed gain to min and still does it and in the middle and at full so is this problem caused by to high sensitivty

[sooren]

Any answers?
Regards
Paul

[Andy from Sandy]

Althought the problem may have been fixed in the firmware the revlock in the past was not tolerent to badly tuned engines or if the geometry of the linkage is not optimal.