Announcement

Collapse
No announcement yet.

Got it started!!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Got it started!!!!

    Yay i got me engine started!!!! Needle is 2 turns.
    Thanks,
    Jake!


    Trex 600E EFL PRO -Spirit FBL
    Goblin 500 competition -Spirit FBL

  • #2
    From what I hear most os engines are two turns, my tt redline 53 is three turns to start with.
    Mike, 3rd Hampton Scout Group
    Spectrum DX7
    Piper Pawnee 40
    Wot Trainer, OS 46Fx
    3D 400
    P68C Scale twin
    SRCMC
    www.controltower.pwp.blueyonder.co.uk/1.html


    Pround owner of an EGS

    Comment


    • #3
      Nice one Jake now get flying!
      I left the hobby 3 years ago and discovered Women.

      I wish I never left.

      Comment


      • #4
        Originally posted by spunkmyer View Post
        From what I hear most os engines are two turns, my tt redline 53 is three turns to start with.
        Yes i think mine started after 2 turns
        I left the hobby 3 years ago and discovered Women.

        I wish I never left.

        Comment


        • #5
          My new 53 was a bit of a pig to start but got it sorted just needs running in now
          Mike, 3rd Hampton Scout Group
          Spectrum DX7
          Piper Pawnee 40
          Wot Trainer, OS 46Fx
          3D 400
          P68C Scale twin
          SRCMC
          www.controltower.pwp.blueyonder.co.uk/1.html


          Pround owner of an EGS

          Comment


          • #6
            im so happy now it works
            Thanks,
            Jake!


            Trex 600E EFL PRO -Spirit FBL
            Goblin 500 competition -Spirit FBL

            Comment


            • #7
              Good news, great to hear its running!
              My OS's run about 1.5 turns give or take a few clicks when running in and then about 1.25 give or take a few clicks (depending on the weather) once run in.
              Rob


              T-Rex 450 Pro - BeastX v3 FBL, Hitec 5065's, DS520, Futaba R6203SB
              Quad x-copter - KK 5.5 Multicopter v4.7, 850KVA motors, 30A ESC's, Orange RC FASST Rx, Carbon & Alu frame, LED strips for orientation, 10x4.5 props.
              Quad x-copter - KK Plus 5.5d, 1000KVA motors, 30A ESC's, Orange RC FASST Rx, GF & Alu frame, LED strips, 10x4.5 props (coming soon!)
              Futaba 9CP & 10CG

              Comment


              • #8
                Nice one Jake,be careful with it,im sure you will be

                Dont forget to get the maiden on video
                T- rex 600n V-bar
                Logo 550sx V-bar
                Logo 600sx V-bar
                Logo 600sx V-bar night flyer

                VBControl, but not the gay white version as i'm simply not gay enough to pull it off!

                Comment


                • #9
                  Originally posted by spunkmyer View Post
                  My new 53 was a bit of a pig to start but got it sorted just needs running in now
                  Id given up trying to get my RL53 consistantly running right so refitted my OS-50........over the last few days ive done the OS carb mod on the RL......alot of the American sites are raving about the OS50 carb on the RL53 engine......so ill have to see how it goes when the weather gets better....

                  C Ya
                  Ken
                  "Yes it is hard to fly"
                  "What do you think.....no you carnt have a go"
                  "Further than you can see"
                  "So your dads got one.....id love to see it"


                  Powered by pure luck and a

                  Comment


                  • #10
                    well I did the mod and its great and now I got glow plugs so we can go play again. tuning and starting is so much easier with this set up too.
                    Attached Files
                    Sponsored By
                    Goblin 500-V bar T-rex700N with FLYBAR.
                    http://www.lindensmfc.co.uk/

                    Comment

                    Working...
                    X