Still got tail trouble on my Logo

[jimheli]

i never had a static hit on my logos ever & that's, before i did the mods , i would do the mods ,look at the main connections carefully, on the packs if its happening with all your packs then look at esc plugs , if you have crashed the heli try another rx you never no, this is something that can be many things if your heli had no problems before ,
flashing rx can be loss of power loose plugs.dogy rx /esc connections , sat rx
, all bearings running smooth one way bearing in good shape , motor bearings ect, no vibs on the heli in hover ect .
it would be a process of looking at every thing
run a cable from the boom with a screw to fix it , then to rx then motor mount i use a crimp on connector to one of the motor bolts , if you have an old servo use that for your plug and the black wire to rx .
as was said could be a bad servo , i have servos here from new and theirs something wrong with one or all 3 ,i have not bothered to look more closely at them as i just replaced them for better ones .
if you have looked at every thing , have a look at the belt all the teeth intact , is the belt jumping on the tail pulley maybe slipping now and again just a thought could be making tail kick .











jim

[p4ddy]

Just thought i'd best end this drama by telling you all it was the tail servo. I sent it to JRmagregor who confirmed it was *******. Since i replaced it with a Futaba BLS254 it's 500% better. What a dam headache that was.

[brin]

nice one glad its all sorted

[p4ddy]

Hmm?? the word s.h.a.gg.ed gets censored yet it allows proper obscenities??