Gyro Dilema

[scoobystig]

i am in the process of assembling my trex 600NSP and am facing a dilema on the gyro

i have a Spare GY401 at the moment, but no tail servo for it, so i could get a 9254 or an Align DS650 to work with it
the question here is does the 650 work ok with the 401

or i could sell the 401 and get the GP750 and DS650

i am trying to get the best as possible but on a budget, i cant afford to be buying a 611 and BLS451

i am at the stage where i am pushing into 3D flight, inverted, flips and tic tocs etc.

so is the 401 ok still or is it a bit old hat now compared to the newer gyro's

all advice greatly recieved

thanks

[Geek]

Sell the 401 I have not used the gp750 but the people I fly with rave about them I will be using one in my next heli when it turns up in the post
I use a 401 on my 450 but it's only just good enough at the moment so think that needs to be canged to a 750 too.

[flatspins]

The GP 750 and DS 650 are an excellent combination.
Will probably never be able to reach the limits of what they offer.
Nice and easy to set up too.

[scoobystig]

Thanks Guys
i was leaning that way, also i want to ideally run a 6v pack and i believe the 401 isnt happy on 6v pack

[Grant85]

Thanks Guys
i was leaning that way, also i want to ideally run a 6v pack and i believe the 401 isnt happy on 6v pack

My 401 runs on 6v

[xygax]

Or.... hang on for a couple of weeks and get a Quark.... from Spartan.... will work from 3.8-8.4v and drives just about any servo...

Steve

[Paulice]

Or stay with futaba and get the GY520?

[scoobystig]

My 401 runs on 6v

what servo are you using Grant?

[scoobystig]

Or.... hang on for a couple of weeks and get a Quark.... from Spartan.... will work from 3.8-8.4v and drives just about any servo...

Steve

ideally want to stick with the 401 as i have this already, was only thinking of chaging to the GP750 as it comes bundled with the DS650 which is the Servo i wanted to use

is anyone using the 401 with a DS650, does it work ok or am i just better getting a 9254?