700/HZ problem

[bish]

Hi my hz in my 700 goes lean as soon as the main tank goes just below half i have checked the tank etc and all looks ok anyone had the same problem?

[robgt]

Sounds like your clunk line may have a problem at the bung end inside the tank?

Cheers,
Rob

[Bruinbear]

I was going to say sounds like the bung.
Mike.

[toetapper]

I think it may be your sprag gasket slipper shaft overhead valve inverter....
Si .
P.S hope this was of help

[Steve]

I think it may be you sprag gasket slipper shaft overhead valve inverter:

Don't talk such tosh - it's the berlinga chingus valve that's clearly over-resonated in its positive pressure reverse osmosis application.

Can't you see that?

It's obvious isn't it?

[Bruinbear]

[toetapper]

Don't talk such tosh - it's the berlinga chingus valve that's clearly over-resonated in its positive pressure reverse osmosis application.

Can't you see that?

It's obvious isn't it?

Now you come to mention it.......

[jiberjaber]

It sounds like your bungholio, I recommend finding a teepee for it, its the only way to be sure.....

Alternativly, you might want to consider changing the tank and bung and adding a header tank plus a bubbless clunk.... that all worked for me

[choppertastic]

So that would be a teepee for my bunghole...... What about the great cornholio